What Does the VisuMax 800 Do During SMILE Pro Surgery?

The VisuMax 800 is the femtosecond laser platform behind SMILE Pro. It does not burn or vaporise tissue. Instead, it places thousands of tiny, precisely focused pulses inside the cornea to outline the tissue the surgeon will remove. Understanding what it does helps you ask better questions at your consultation. Knowing what the laser actually does can make surgery day feel much less mysterious.
01 A femtosecond laser, not an excimer laser
Many people picture laser eye surgery as a beam sculpting the surface of the eye. That description fits the excimer lasers used in LASIK and PRK. The VisuMax 800 is a femtosecond laser, which works beneath the surface by separating tissue in precise planes rather than vaporising it. This difference is what makes a flap-free, small-incision procedure possible, and it explains why the front of the cornea is left largely intact. This distinction matters because it explains why no separate reshaping laser is used. The femtosecond laser does all the work inside the cornea.
02 How ultra-short pulses separate tissue
Each pulse lasts a quadrillionth of a second and is focused at an exact depth in the cornea. At that point it creates a microscopic bubble that gently separates the tissue. Thousands of spots placed side by side form a smooth cleavage plane, a little like perforations in a sheet of paper. Because the energy is so brief and localised, surrounding tissue is barely affected, which supports a smooth surface for healing. Each pulse affects only a microscopic area, so surrounding tissue is left largely undisturbed.
03 Docking with a curved contact glass
Before the laser runs, a sterile curved interface meets the cornea and light suction holds the eye steady. The curved shape is designed to follow the natural contour of the eye, which helps keep pressure inside the eye comfortable during docking. Patients typically feel pressure around the eye and see the fixation light blur or fade briefly. This is an expected part of the process and does not mean anything has gone wrong. The curved glass also helps keep the eye steady during the short treatment time.
04 Creating the lenticule
Once docked, the laser outlines two curved surfaces inside the corneal stroma, forming the back and front of the lenticule. Its thickness and shape are calculated from your prescription and the planned optical zone. For astigmatism, the lenticule is shaped asymmetrically so that one direction of the cornea is flattened more than the other. Accurate preoperative measurements are therefore essential, because the laser follows the plan exactly. The thickness and diameter of the lenticule are planned from your measurements before surgery.
05 Making the access incision
As a final step, the laser creates a small side incision, typically a few millimetres long. This is the doorway through which the surgeon will reach and remove the lenticule. Because no large flap is cut, more of the cornea's strong front layers remain untouched than in flap-based procedures. This is one reason SMILE is studied for its effects on corneal strength and on post-operative dryness. Because the opening is small, most of the cornea's strong front layers remain intact.
06 Speed compared with earlier platforms
A key difference between the VisuMax 800 and the earlier VisuMax 500 is pulse rate. The higher rate shortens the laser step considerably, so the eye spends less time under suction. Many patients find a shorter docking period more comfortable, and it reduces the time they must stay perfectly still. A faster laser does not change the surgeon's manual steps, which still take a few careful minutes per eye. Many patients say the laser part is over before they have time to feel anxious.
07 Centration and rotation support
The platform includes tools that help the surgeon centre the treatment on the eye's visual axis and account for the slight rotation that occurs when you lie down. This matters most when astigmatism is being corrected, because even a few degrees of misalignment can reduce the effect. These tools support careful planning and surgical judgement; they do not replace them or automate the procedure. These tools support the surgeon's skill rather than replacing it.
08 What happens after the laser stops
When the laser pass is complete, suction releases and the surgeon takes over under the microscope. The lenticule is gently separated and removed through the incision, changing the cornea's curvature to correct your vision. The cornea is inspected and cleaned, and the second eye is then treated in the same way. After a short rest and a quick check, you go home with drops, protective eyewear and a follow-up appointment. Most people see reasonably well within a day or two, with sharpness improving over the following weeks.
The bottom line
The VisuMax 800 is a precise tool for creating the lenticule and incision, but the result depends just as much on the measurements behind the plan and the surgeon carrying it out. Ask how both are handled before you book. Ask your surgeon to walk you through each step before the procedure.
This article is for general information only and does not replace an examination or personal advice from a qualified ophthalmologist.



